Exercise: How to calibrate to paper

Requirements: Black Ozobot Marker, 1 8x10 paper

  1. Use the black marker and draw a 1 1/2 inch circle in the middle of the page.
  2. Press and hold the power button until the LED blinks white
  3. Quickly place the Ozobot in the middle of the black circle
  4. Ozobot with flash blue, move forward, flash a green light, a turn off.
  5. Calibration is successful if flashes green and turns off
  6. If the Ozobot flashes red then start over

Complete and Continue